Page 1 of 1

Start here - Kit contents

Posted: Mon Nov 18, 2013 12:59 am
by Tony
When you receive your kit there should be the following:

2 sheets of paxolin 400x400mm, one engraved for the chessboard top and one with a cutout for the power socket
33 paxolin strips for the case sides
7 plastic bags of parts
34x IN-7 Nixie tubes
4 large PCBs with 16 printed coils on each
1 12V power supply (you will need to supply a suitable mains lead for your location

Image

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:03 am
by Tony
Bag 1 contents:

Image.

  • 25x M4 Stainless steel or brass dome nuts
  • 25x M4x20 bolts
  • 50x M4 Stainless steel washers
  • 18x M4 Nuts
  • 9x M4 Washers
  • 18x Paxolin spacers or 60x washers
  • 8x Rubber feet
[/b]

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:05 am
by Tony
Bag 2 contents:

Image
  • 33x Chesspiece bases

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:06 am
by Tony
No longer used.

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:10 am
by Tony
The 2018 kits have pre-built piece PCBs. You'll find the pin sockers in the base component bag.

Bag 4 contents:

Image

  • 32x Display PCBs
  • 75x ā€˜Dā€™ socket pins (3x 25 pin sockets)
  • 230x 1N4148 Diodes
  • 33x 1N Capacitors (Yellow)
  • 230x 10N Capacitors (Brown)
[/b]

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:12 am
by Tony
Bag 5 contents:

Image

  • 4x 1k 1/4W Resistors
  • 4x .47r 1/4W Resistors fusible
  • 65x 1n Ceramic capacitors
  • 80x 10n Ceramin capacitors
  • 40x 33u 16v Electrolytic capacitors
  • 13x 4v7 Zener Diodes
  • 20g Lead free 'solder'
[/b]

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:17 am
by Tony
Bag 6 contents:

Image

  • 65x 2n7000 MOSFET
  • 4x 8 pin DIL sockets
  • 4x PIC10f320 Microcontrollers
[/b]

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:18 am
by Tony
Case parts:

Image

Re: Start here - Kit contents

Posted: Mon Nov 18, 2013 1:19 am
by Tony
Main board PCBs:

Image