Piece display PCB

Tony
Site Admin
Posts: 957
Joined: Tue Jul 24, 2012 8:05 pm

Re: Piece display PCB

Post by Tony »

Fit two pins as shown and solder in place.

Image

Make sixteen of these for use with 16x IN-15As: Pawn (Minion)
Tony
Site Admin
Posts: 957
Joined: Tue Jul 24, 2012 8:05 pm

Re: Piece display PCB

Post by Tony »

Fit two pins as shown and solder in place.

Image

Make four of these for use with 4x IN-15As: Tower
Tony
Site Admin
Posts: 957
Joined: Tue Jul 24, 2012 8:05 pm

Re: Piece display PCB

Post by Tony »

Plug a suitable nixie tube for the board into the two pins, the anode can be identified by the white ceramic coating on the inside of the tube.
This connects to the 'HV' pin. It's now ready to test and once confirmed working can be fitted inside a piece base case.
Post Reply