Page 2 of 2

Re: Piece display PCB

PostPosted: Sun Dec 07, 2014 5:14 am
by Tony
Fit two pins as shown and solder in place.

Image

Make sixteen of these for use with 16x IN-15As: Pawn (Minion)

Re: Piece display PCB

PostPosted: Sun Dec 07, 2014 5:31 am
by Tony
Fit two pins as shown and solder in place.

Image

Make four of these for use with 4x IN-15As: Tower

Re: Piece display PCB

PostPosted: Sun Dec 07, 2014 5:33 am
by Tony
Plug a suitable nixie tube for the board into the two pins, the anode can be identified by the white ceramic coating on the inside of the tube.
This connects to the 'HV' pin. It's now ready to test and once confirmed working can be fitted inside a piece base case.