gauge of enameled copper wire

Discussion for purchasers of our original IN-7 Nixie chessboard
fdastoor
Posts: 44
Joined: Mon Sep 10, 2012 8:49 pm

gauge of enameled copper wire

Post by fdastoor »

Tony,

what is the gauge of the copper wire we are using for the coils? I do not have a micrometer to make the measurement myself.

phil
Tony
Site Admin
Posts: 948
Joined: Tue Jul 24, 2012 8:05 pm

Re: gauge of enameled copper wire

Post by Tony »

It's 0.18mm dia., a slightly thinner wire would have made coil winding easier but increased resistive losses. It only just fits on the piece formers.
fdastoor
Posts: 44
Joined: Mon Sep 10, 2012 8:49 pm

Re: gauge of enameled copper wire

Post by fdastoor »

Would 33 AWG be an adequate substitute?
Tony
Site Admin
Posts: 948
Joined: Tue Jul 24, 2012 8:05 pm

Re: gauge of enameled copper wire

Post by Tony »

It would work OK on the baseboard coils but might be a bit tight for the piece coils.
fdastoor
Posts: 44
Joined: Mon Sep 10, 2012 8:49 pm

Re: gauge of enameled copper wire

Post by fdastoor »

so 34 0r 35awg would be better?
Tony
Site Admin
Posts: 948
Joined: Tue Jul 24, 2012 8:05 pm

Re: gauge of enameled copper wire

Post by Tony »

If you have a choice go with the 34 dia.
fdastoor
Posts: 44
Joined: Mon Sep 10, 2012 8:49 pm

Re: gauge of enameled copper wire

Post by fdastoor »

thanks tony
Post Reply