Base LED states

Advice on out-of the box setup, floating advice and any other hints
Zedsquared
Posts: 11
Joined: Tue Nov 07, 2017 9:56 pm

Base LED states

Post by Zedsquared »

What do the different coloured flashes of the middle base LED mean?
Blue is "Bluetooth command received" I know but I've seen green flashing too, just after levitating, usually.
Are there other posible states?

Cheers,
Robin.
Tony
Site Admin
Posts: 948
Joined: Tue Jul 24, 2012 8:05 pm

Re: Base LED states

Post by Tony »

Green is either overcurrent or overtemperature, it's usually when the electromagnets are still settling the magnet into place. Red is low voltage when it's running from battery backup.
Post Reply