Thanks for buying our nixie clock! I hope you like it.

You might notice our instructions are all posted on our forums. This is so people can ask for advice, or help other people out. So if you get stuck with something, try posting your issue on the boards. Somebody might have a handy solution.

Okay, let’s get to it. I recommend you follow the list numerically, but, if you fancy, you can start on any part you like.

1: The first step is to make sure you have everything. Here’s a full list of the kit contents, with photographs.

2: Once you’re sure you have what you need, start by assembling the main PCB. If you are using the Infra-Red version, the instructions for that are here and here. If you are using the button version, look here and here.

3: Now to fit the nixies. Look here.

4: After that, it’s time to assemble the case. Instructions here.

5. Once everything is fitted together, you should read up on how to use the clock. Instructions for the Infra-Red version are here, and for the button version here.

Alright, you’re done! That was pretty simple. If you’re having any issues, check the troubleshooting section. If that fails, send an email to Tony and ask for help.

Close Menu