![Image](http://www.lasermad.com/instructions/TimeFlies/PSU1/PSUPCB1.jpg)
You should have received:
1x Bag1 with PCB, components and case nuts/bolts.
1x Bag2 Bluetooth receiver, 433MHz receiver, movement detector, EEPROM and PIC ICs.
1x Bag3 Paxolin case parts.
1x 15V Power supply, either a 2-pin USA, EU or 3-pin UK type.
1x Micro USB cable to connect the PSU to the base unit. - this is now packed with the base itself.